Rhiwa Easy Aero roof ventilator
Require powerful ventilation in your van van's cargo space all times?
No fragile moving parts on the roof - can go through a carwash
No ground screw required - suitable for electric vans
High capacity due to powerful push and pull action
Prevent moisture, dirty air and heat in your van
Condensation, dirty air and heat create a bleak working environment. Moisture can also affect tools and equipment. By ensuring that your van’s cargo space is properly ventilated, you can prevent this misery. That is possible with the Rhiwa Easy Aero roof ventilator.
The unique push-and-pull action of the Easy Aero ensures powerful air circulation whilst the vehicle is in motion. Fresh air is supplied through one hole in the roof fan, and dirty air and heat are removed through the other hole – negating the need for a floor duct. This saves a lot of work and prevents damage. Still require sufficient fresh air in your van when the vehicle is at a standstill and driving at a low speed? Then choose the Easy Aero electric roof ventilator.
View the Easy Aero roof fan
What customers say about us
Assembly in no time
Install the Easy Aero roof ventilator in three easy steps. Download the complete mounting instructions on the Easy Aero roof fan mounting page.
Step 1
Mark out the holes using the drilling template provided and create the holes in the roof using a 90 mm punch (available upon request).
Stap 2
Place the foam gasket on the bottom of the Easy Aero roof fan and insert the tubes through the holes with the grille on the front.
Stap 3
For the basic Easy Aero, screw the cover plate onto the inside of the roof using the screws provided. For the Easy Aero Electric, you will need to install the electric module.